The reliable solution for balancing pH
and reducing corrosion
Introducing Corrosion Shield™ from U.S. Water
What is acidic water?
Acidic water is any water with a pH value of 6.5 or less. pH is measured on a scale between 1 and 14, with 7 representing the neutral value. Acid water occurs naturally, as rain falls to earth soft and slightly acidic. As it absorbs minerals and dissolves solid materials, the pH of the water can rise. Water with a pH value higher than 7.5 is considered basic, or alkaline.What causes acidic water?
Water becomes acidic when it combines with carbon dioxide during the process of precipitation. During the hydrologic cycle, water from sources like the ocean, lakes, and streams evaporate. As the moist air rises, it cools and condenses into water vapor, creating clouds. This process is a natural form of water filtration. When water evaporates, it is stripped of water hardness, bacteria, and minerals. The water distillation process mimics this principle to purify water. Since all of the minerals have been vaporized, this water is now soft and acidic.The metered system delivers precise pH adjustment
This precision injection system neutralizes the pH at any flow rate – high or low. How does it work?
- First, your home’s water enters through the Meter which measures the flow rate. (See system diagram above)
- Secondly, the Electronic Injection Pump responds to the meter data and injects potassium carbonate from the tank into the water stream. This Pump mounts near the tank for easy accessibility.
- Finally, the water then flows through the Mixer, which ensures a consistent blend for perfectly balanced water as it flows into your home’s water system.
Corrosion Shield’s “smart meter” automatically adjusts to maintain precise pH level
SMART Injection System vs Calcite Neutralizer System
Another option for treating low pH in your home’s water is a calcite neutralizer system.
While both systems can initially adjust your pH to desired levels, the Injection pH Balancing System is more effective at rapidly adjusting the pH of acidic water and maintaining a steady pH level over the long-term.
Components
Meter: 2.58″W x 4″D x5.5 4.6″H
Injection Pump: 4″W x 5.25″D x 6″H
Tank: 18″W x 18″D x 35″H
Electrical Requirement: 120V
4 gallon liquid concentrate additive.
Refill frequency depends on water usage.
*National Sanitation Foundation (NSF)
At U.S. Water, we are committed to delivering solutions that not only meet but exceed your expectations. Our Wisconsin state-certified laboratory ensures timely and accurate water testing.